Mimosa: 5GHz 1 Gbps PtP backhaul

SKU:
B5
Availability:
In stock Items usually ship within 24 hours, see our stock policy.
$781.00
(No reviews yet)
Weight:
17.00 LBS
Width:
19.00 (in)
Height:
19.00 (in)
Depth:
10.00 (in)
Current Stock:
Adding to cart… The item has been added

B5 Features

 

Overview

The B5 Backhaul is changing the game. Leveraging 802.11ac, 4x4:4 MIMO and radical engineering for service providers that demand the same capacity, speed and reliability as fiber. With 1.7 Gbps PHY and a unique spin on reliability, the B5 is re-defining gigabit wireless technology.

The B5 is capable of 1 Gbps throughput, a low 2 ms latency and has an integrated dual-polarized antenna with 25 dBi of gain. Ready to handle the next wave of 5 GHz, the B5 is operational from 5150-5850 MHz*.

The B5 brings with it an entirely new set of features never seen before in the outdoor wireless market.

 

Dual Link

Dual Link revolutionizes backhaul reliability by load balancing across two non-contiguous channels to avoid outages due to interference. If one channel experiences interference the radio maintains connection while simultaneously searching for new replacement channel.

 

Auto Everything

Wireless interference can change in an instant, and your network needs to adapt. The Mimosa B5 offers constant spectrum analysis with historical and real-time data to dynamically make smarter decisions dynamically.

The Auto Everything feature will automatically adjust frequency, channel width and power levels based on environmental feedback. This feature can be turned off for users that prefer more control.

  

Local and Network-Wide Spectrum Multiplication 

 

With scarce spectrum and lots of traffic to transmit, colocation of devices is a must. While this has been a constant struggle for most of the products on the market, the B5 takes an advanced approach. Using standard GPS and GLONASS for sync, we can ensure that all radios on the network are transmitting and receiving at the same time to avoid any interference. For even more protection, we use the most advanced RF isolation on the market, allowing radios to operate in close proximity to one another.

 

Lightweight

 We're making climbing towers easier. The B5 is the lightest gigabit-integrated backhaul in the industry, and features a quick-mount bracket to eliminate installation frustration.

Low Power

To save you operating costs, we engineered the perfect solution for solar-based deployment: 1 Gbps performance with GPS sync delivered in under 20W.

Reliable

Outdoor IP67 rating, extended temperature operation and fully-integrated lightning ESD protection make the B5 ultra-tough.

Easy

A dedicated management 2.4 GHz Wi-Fi radio lets your smartphone easily configure the B5 from the bottom of the tower. Smart GPS-assisted aiming technology triangulates your link's goal signal strength for fine tuning. 

Low Latency & High Performance 

The Mimosa TDMA protocol establishes a new benchmark for PHY:MAC efficiency, low latency, and spectrum re-use.

Each Mimosa backhaul radio includes an integrated high sensitivity GPS + GLONASS receiver for the best possible satellite reception, and consistent high-precision 1 PPS-based timing for coordinating TX/RX sync.

Choose between the highest possible throughput TDMA slot times (which use high packet aggregation techniques), or low latency slot times to support latency-critical vertical applications.

Configure the radio for an equal(50%/50%) or unequal (75%/25%) traffic splits to maximize throughput in the downlink direction.

Advanced RF Efficiencies

Stream Power Peaking - Multi-stream MIMO radios normally settle on the lowest MCS rate across all the streams, severely degrading performance. Mimosa’s backhaul radios constantly advise the remote-side radio of individual stream receive levels, increasing those signal levels to meet the highest common attainable MCS rate.

Predictive AGC - When there’s a consistent signal from a single client, Mimosa’s Automatic Gain Control narrows the gain window of the receive signal amplitude for the next incoming packets (by 8 dB) to accelerate packet signal level detection.

Precision Receive Activation - A technique by which the receiver is precision-activated only when packets are expected to arrive over the link. Thus reducing the potential interference typically seen if a receiver prematurely begins decoding.

 

 

The B5 Backhaul is changing the game. Leveraging 802.11ac, 4x4:4 MIMO and radical engineering for service providers that demand the same capacity, speed and reliability as fiber. With 1.7 Gbps PHY and a unique spin on reliability, the B5 is re-defining gigabit wireless technology.

The B5 is capable of 1 Gbps throughput, a low 2 ms latency and has an integrated dual-polarized antenna with 25 dBi of gain. Ready to handle the next wave of 5 GHz, the B5 is operational from 5150-5850 MHz*.

The B5 brings with it an entirely new set of features never seen before in the outdoor wireless market.


Mimosa

Specifications

Performance
Max Throughput Up to 1.0 Gbps IP ( 1.7 Gbps PHY )
Low Latency 2+ ms
Wireless Protocols TDMA
Radio
MIMO & Modulation 4x4:4 MIMO OFDM up to 256QAM
Bandwidth Single or Dual 20/40/80 MHz channels
Frequency Range 5150-5850 MHz restricted by country of operation (UNII 2 US FCC certification pending)
Max Output Power 30 dBm (2-stream), 27 dBm (4-stream)
Sensitivity ( MCS 0 ) -87 dBm @ 80 MHz
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz
Antenna
Gain 25 dBi
Beamwidth ( 3dB ) 8° ( Hpol and Vpol )
Elevation Adjust ± 20° mechanical adjust
Front-to-Back Ratio >30 dB
Cross-Polar Isolation >20 dB or better
Polarization Dual-Linear (horizontal & vertical)
Power
Max Power
Consumption
20W
System Power Method 802.3at compliant
System Lightning &
ESD Protection
6 kV
PoE Power Supply 56 V Power over Ethernet supply with IEC61000-4-5 surge protection
Physical
Dimensions Diameter: 442 mm (17.4")
Depth: 362 mm (14.3") with bracket
Weight 4.9 kg (10.8 lbs) with bracket
Enclosure
Characteristics
Single enclosure with radome
Outdoor UV stabilized plastic
Painted steel bracket plate
Wind Survivability 200 kmph (125 mph)
Wind Loading 39 kg @ 160 kmph (86 lbs @ 100 mph)
Mounting Pole mounting kit included for 30mm (1.18") to 90mm (3.54") OD pipes
Environmental
Outdoor Ingress
Protection Rating
IP67
Operating
Temperature
-40°C to +55°C (-40°F to 131°F)
Operating Humidity 5 to 100% condensing
Operating Altitude 4420 m (14500') maximum
Shock & Vibration ETS 300-019-2-4 class 4M5
Features
Gigabit Ethernet 10/100/1000-BASE-T
Dual Link
Operation
2 independent dual-stream radios operating on non-contiguous frequencies
Automatic load balancing of traffic across 4 total MIMO streams with individual stream encoding up to 256 QAM
Management
Services
Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI
2.4 GHz 802.11b/g/n radio for local management access
Smart Antenna
Alignment
Hands-Free dedicated 2.4 GHz Wi-Fi management radio
Smart Spectrum
Management
Active scan monitors/logs ongoing RF interference across channels (no service impact)
Dynamic auto-optimization of channel and bandwidth use
Security 128-bit AES PSK with hardware
acceleration
QoS Supports 4 preconfigured QoS levels
GPS Location GNSS-1 (GPS + GLONASS)
Colocation
Synchronization
1PPS GPS TX/RX synchronization for colocated co-channel radios
Adjustable up/downstream bandwidth ratio
Regulatory + Compliance
Approvals FCC Part 15.407, IC RS10, CE,
ETSI 301 893/302 502
RoHS Compliance Yes
Safety UL/EC/EN/ 60950-1 + CSA-22.2