AirOS Manual: https://help.ubnt.com/hc/en-us/categories/200319710-airMAX
Ubiquiti Help: https://help.ubnt.com/
1st Time Login:
1.) Configure your PC or Laptop to the following IP information for your LAN/Ethernet adapter:
IP Address: 192.168.1.254 (or any IP other than the units default of 192.168.1.20)
Subnet Mask: 255.255.255.0
Default Gateway and DNS is not necessary for basic unit setup.
2.) Plug your Ubiquti unit into the POE port of the POE adapter, it will power on. Plug the LAN port of the POE adapter into the LAN port of your PC/Laptop.
3.) Log into the Ubiquiti unit with the default user name and password.
4.) Follow the instructions in the manual to configure the unit to your needs.
AirOS Manual: http://www.ubnt.com/wiki/index.php?title=AirOS_3.4
Note: You will need to reconfigure your laptop or PC settings to DHCP or your particular network environment to work after config.
Stuck, lost, or need assistance? Please contact us about remote support and configuration options. Preconfiguration Solutions starting as low as $25 per unit. Remote Support Solutions start as low as $60.